Termékek Menü

V6 Szilikon Socks Szigetelés (3-as csomagban) Eredeti E3D

V6 Szilikon Socks  Szigetelés (3-as csomagban) Eredeti E3D Katt rá a felnagyításhoz
2.164 Ft (1.704 Ft + ÁFA)
Cikkszám: CE3D02320
Elérhetőség: Raktáron

Várható szállítási idő:
- Raktáron lévő termékekre 1-5 munkanap
- Rendelhető termékekre 3-4 hét

  • Made of a heat-resistant, non-stick silicone material our socks will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.
  • These also offer a huge boost in temperature stability, particularly if you use high airflow cooling around the nozzle to cool the print. The additional cooling combined with reduced radiation of heat from the block and nozzle to the print really boost the ability to print great overhangs and bridges, all while keeping the HotEnd temperature extremely stable.
  • The covers simply push onto the front of the HotEnd with no disassembly - they will be a tight fit when first pushed on cold. When hot the silicone will expand to the correct size to fit the hotend snugly.

V6 socks come in a pack of 3 because they don’t last forever. Depending on what materials you print and how much abuse they get they eventually wear away at the nozzle tip. Even with sticky abrasive materials and a bit of abuse they should easily last 100+ print hours. With less sticky materials like ABS and gentler use you can get almost infinite life. Your mileage may vary.

Raktárkészlet szűrő